Banbros Engineering Private Limited

• Quick clamping vice.
• LED lighting system
• Main shaft of cutting disc is movable upward and downward which can prolong the using life of cutting disc greatly
• Two working modes of Intermittent cutting and continuous cutting
• 60L water cooling Tank

• Max. cutting diameter: Ø 100mm
• Rotating speed of main shaft: 2300 rpm
• Sand wheel specification: 350 x 2.5 x 32mm
• Automatic feeding speed: 0-180mm/min
• Cutting disc upward and downward moving distance: 0-50mm
• Forward and backward moving distance: 0-340mm
• Working table size: 430 x 400 mm
• Motor power: 3 KW
• Power supply: 380V, 50Hz (three phases)

• Feeding speed: 0~30mm/min (increment 0.01mm)
• Speed: 300~5000rpm
• Max cutting section: φ60mm
• Maximum stroke: Y axis 200mm
• Cutting wheel: 200 x 1.0 x 32mm
• Cutting power: 1100W
• Power source: 220V 50HZ
• Overall Dimension: 700mm×720mm×410mm
• Weight: approx. 130 KG

Our ACO-100 Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of heat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

*For more details please refer the attached product catalog.

Our Abrasive Cut Off Machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has built in cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of heat.

ACO-200 Abrasive Cutter is rugged, sturdy and designed to cut metallurgical samples to optimal quality consistently and safely. Cutting wheel spindle is connected with motor shaft by pulley and belt mechanism.

Key Features

• Large viewing window to monitor the cutting operation.

• Illuminated Inside chamber for monitoring the cutting operation.

• Coolant circulation is provided with suitable filtering arrangement.

• Emergency Stop Switch with Door limit Switch

• Door Safety Interlock

• Side Opening for Longer Component.

• Easy Operator Panel

Technical Specification :

Manual Abrasive Cutting Machine is rugged, sturdy and designed to cut metallurgical samples to optimal quality consistently and safely. The cutting wheel is mounted on the spindle to get the optimum output of the motor. The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spindle and the cutter unit is balanced by springs for smooth downward movement. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of heat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

*For more details please refer the attached product catalog.

Description:- 

Our BC-150A Automatic Metallographic Abrasive cut-off machine can be used to cut various metal and non-metal materials so as to get the required specimen and observe the metallographic or lithofacies structure. It has built in magnetic filtration recirculation cooling system so as to clear up the chips produced during cutting and to avoid burning the metallographic or lithofacies structure of specimen because of heat generated during cutting operation.

Our Automatic Cut-off machine is floor model rigid, sturdy and designed to cut metallurgical samples to gain optimal results with increased surface finish and quality that too consistently and safely. The Abrasive cutting wheel is connected with motor with the help of pulley and belt mechanism in a chamber separate from the main cutting chamber.

The machine is PLC programmable and provides longitudinal sectioning (enhancing us to increase the cutting volume) in Automatic as well as Manual mode of cutting and has movable T-slot work table.

Description:- Our ACO-150 Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of heat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

*For more details please refer the attached product catalog.

Automatic Abrasive Cut Off Machine is rugged, sturdy and designed to cut metallurgical samples to optimal quality consistently and safely. The Cutting wheel is mounted on the spindle to get the optimum output of the motor. The movement of cutting wheel towards the specimen is applied automatically with the help of servo motor attached directly to the ball screw and can also be manually moved with the help of handles provided. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of heat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges

Key Features

• Stainless Steel machine body and worktable.
• Large viewing window to monitor the cutting operation.
• Inside chamber is illuminated and see-through hood isprovided for monitoring the cutting operation.
• Coolant circulation is provided with suitable filtering arrangement.
• Emergency Stop Switch with Door limit Switch.
• Door Safety Interlock.
• Side Opening for Longer Component.