Portable Hardness Tester

Product Details:

Portable Hardness Testers are ideal hardness testing tools where large samples, which cannot be brought to a traditional benchtop hardness tester, or specimens with hard to access areas are to be tested. A wide variety of the portable hardness testers, offered by BANBROS to ensure that we recommend the most suitable model for your application.

Application Range

·          Good for all metals

·          Ideal for production level testing

·          Best suited for on-site testing of heavy, big or already installed parts

·          Handy for difficult to access or confined test locations

·          Automatic compensation for impact direction

·          Excellent for material selection and acceptance tests

·          Easy to use and accurate on curved test surfaces (R > 10mm)

·          Metal production & processing

·          Automotive & transportation

·          Machinery & Power plants

·          Petro-chemical, refineries

·          Aerospace & shipyard

·          Metal Constructions

·          Testing Services & laboratorie

 

Product Details:

These Hardness Testers are ideal hardness testing tools where large samples, which cannot be brought to a traditional tabletop hardness tester, or specimens with hard to access areas are to be tested. A wide variety of the portable hardness testers, offered by us to ensure that we recommend the most suitable model for your application. The extensive selection of our Portable hardness testers is available from low cost economy models up to advanced models coming with more features.

Additional Information:

• Delivery Time: 2-4 Week
• Packaging Details: Wooden Box Packing

Product Details:

Portable Magnetic Digital Brinell and Rockwell hardness tester, which can make accurate Brinell hardness test with conventional indentation method of ISO 6506.2 and ASTM E 10.It can also make rapid Brinell hardness test with depth-measuring method of ASTM E 103, and read hardness value directly. At the same time, it also can-do Rockwell hardness test according to Rockwell hardness testing method in ISO 6508.2 and ASTM E 18.These functions can meet the demand of precise and rapid Brinell hardness testing on-site of large steel and iron parts.It Simplified operation of Rockwell hardness and depth-measuring Brinell hardness, only need to load the total test force remain for several seconds and then unload the total test force to finish the test, it is very simple and high efficiency.This instrument stores an accurate basic hardness, that is depth curve made from plenty hardness blocks; it also stores several Brinell curves of common materials. We can supply the service of making precise Brinell curve of common material according to customers requirement. Advanced curve correction methods can be used to test a variety of special materials.This instrument can check and calibrate the accuracy on-site by precise indentation method at any time.

Main Feature

• World initial patent product
• With advanced imported sensors as well as high integration, high stability electronic components to keep the high reliability of the hardness tester.
• One hardness tester with Brinell and Rockwell two functions can meet the demands of most manufacturing users.
•  It can make rapid Brinell hardness test with depth-measuring method of ASTM E 103, and read hardness value directly.
•  Insensitive to temperature changing on workshop.
• Test by absorbing to iron and steel parts, and it can finish the test by unilaterally touching the parts. It can test any dimension parts, especially steel tubes and weld on pipes.
• Portable and easy to carry. The Total weight 5.3kg of the tester, it is the smallest Magnetic Digital Brinell and Rockwell hardness tester so far.
• Standard package including standard Brinell hardness test block and Rockwell hardness test block.

Additional Information:

• Delivery Time: 2 weeks

Product Details:

DESCRIPTION:- 

BHR series portable Rockwell hardness tester complies with the basic designing principles of Rockwell hardness testing in accordance with international standard ISO6508, American Standard ASTM E18 and ASTM E110.The hardness values can be read directly from the Rockwell hardness testers after rapid and accurate operations. It can be considered as a non-destructive testing with very small indentations. This kind of testers can be used at site to test the finished or semi-finished work pieces piece by piece in batches. Rockwell hardness testers are mostly applied in the metal-processing enterprises.

Additional Information:

• Delivery Time: 2-4 Week

Product Details:

BU-300M Motorized Ultrasonic Hardness Tester is a popular portable durometer. It applies method of ultrasonic contact independence to make hardness testing at the spot or in the laboratory. BU-300M is a perfect portable durometer for hardness testing about the coating and plating, it can measure the hardness of chrome, copper plating, carburized layer and Nitriding layer effectively. BU-300M is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc. BU-300M can not only work with the motorized probes, but also work with the manual probes, which is able to meet the different application in light of different condition of surface roughness. BU-300M conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008

Additional Information:

• Production Capacity: 10
• Delivery Time: 3-4 Week
• Packaging Details: Wooden Box Packing

Product Details:

BU-300H Manual Ultrasonic Hardness Tester is a classical portable durometer. It applies method of ultrasonic contact independence to make hardness testing at the spot or in the laboratory. BU-300H is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails, etc. BU-300H can not only work with the manual probes, but also work with the motorized probes, which is able to meet the different application in light of different condition of surface roughness. BU-300H conforms the standard ASTM A1038-2005, DIN standard DIN50159-1-2008

Additional Information:

• Production Capacity: 10
• Delivery Time: 3-4 Week
• Packaging Details: Wooden Box Packing

Product Details:

DESCRIPTION:-

These Hardness Testers are ideal hardness testing tools where large samples, which cannot be brought toa traditional tabletop hardness tester, or specimens with hard to access areas are to be tested. A widevariety of the portable hardness testers, offered by us to ensure that we recommend the most suitable modelfor your application. The extensive selection of our Portable hardness testers is available from low cost economymodels up to advanced models coming with more features.

Features:-

-LCD display of 128×64 matrix with back-light, showing all functions and parameters.
-Converts to all common hardness scales (HL,HV,HB,HRC,HRB,HS).
-English displaying and easy and convenient menu operation
-Powerful PC Software available and USB 1.0 interface and USB with Protective Membrane
-7 types of Impact Device optional, which don''''''''t need to be recalibrated when changing them
-Memory of 600 groups data impact times:32 1
-Lower limit setting and sound alarm
-Material of “cast steel” is added; HB values can be read out directly when D/DC impact device is used to measure “cast steel” work piece.
-Normal battery AAA and big power store while USB connected and charging controlling circuit.
-Inbuilt function of Software Calibration

SPECIFICATIONS :-

Hardness scale :- HL, HB, HRB, HRC, HV, HS

Measuring range :- HLD170-960

Memory :- (48-600)groups(impact times: 32-1)

Accuracy :- ±6HLD(760±30HLD) error of displayed value

            6HLD(760±30HLD) repeatability of displayed value

Standard Impact Device :- D

Optional Impact Devices :- DC/D+15/G/C/DL

Max. Workpiece Hardness :- 996HV(For Impact Devices D/DC/DL/D+15/C)

                           646HB(For Impact Device G)

Min. Radius of Workpiece :- R min=50mm(with special supporting R min=10mm)

Min. Workpiece weight :- 2~5kg on stable support 0.05~2kg with compact coupling

Min. Workpiece thickness :- 5mm (Impact Devices D/DC/DL/D+15)

                            1mm (Impact Device C)

                            10mm (Impact Device G)

Min. thickness of hardened surface :- 0.8mm

Power :- Normal AA Battery

Continuous Working time :- approx. 100h (no back light off)

Operating temperature :- 0~40 Degree

Relative humidity :- ≤90%

Overall dimensions :- 125*67*31mm (main unit)

 

Weight :- 0.3kg (main unit)

Additional Information:

• Delivery Time: ! week