Metallographic Hot Mounting Press

Product Details:

 Description:

This machine is suitable for small or irregular specimen so as to cut the sample and polish the sample and then test spectral detection or hardness.

The digital temperature control instrument can control temperature. After mounting the sample, the machine will stop automatically. It is ideal equipment's for factory, scientific research institution and college universities laboratory.

 

Application:

·     This machine is designed for purpose of the last process before polishing.

·  It is setting up those small, difficult-to-hold or irregular specimens for metallographic test.

· It can facilitate polishing and watch properly the ideal material structure and measure the hardness of the material by hardness tester.

· The inserts for this machine are limited to thermosetting materials only .

· The punching temperature of different thermosetting materials can be adjusted depending upon the features of materials.

 

Technical Specification:

Parameter'sSpecification

DisplayTouch Screen panel

Mould diameter Ø30mm or Ø45mm

Thermoforming rangesMAX190ºC

Timer range0-30min

heating power800W

Input voltage220V/50HZ

Dimensions260mm x360mm x450mm

Net weight35KG

Additional Information:

• Production Capacity: 10
• Delivery Time: 1-5 week

Product Details:

Our Manual Hot Mounting Press is a mechanical type machine. By turning the handwheel of the machine, a coupling of bevel gear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve.The thermoset plastic granules together with specimen being mounted is formed under heated conditions. During this process the pressure is selfadjusted by a spring fixed inside the machine. A signal light is used to indicate the pressure level. The mounting press is equipped with a PID digital temperature controller to establish real time temperature meanwhile, the timer is equipped to realize the semi automation of sample – making, while obviously increasing working efficiency. For each specimen mounting, 8 10 minutes is enough and a mirror like specimen can be acquired.

Technical Specifications:

Additional Information:

• Item Code: BQ2B-22
• Port of Dispatch: ghaziabad
• Production Capacity: 1-7
• Delivery Time: 1-3 Weeks

Product Details:

Our Specimen Hot Mounting Press BETAMON -1 is a mechanical type machine. By turning the hand-wheel of the machine, a coupling of bevel gear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve.

The thermo set plastic granules or Bakelite powder together with specimen being mounted is formed under heated conditions. During this process the pressure is self-adjusted by a spring fixed inside the machine. A signal light is used to indicate the the heater operation. The mounting press is equipped with a Digital PID temperature-timer controller to establish real-time temperature meanwhile.

For each specimen-mounting, 8-10 minutes is enough for the mould to be prepared and can be handed over for polishing.

After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient for further processing.

Technical specifications:

Additional Information:

• Item Code: BETAMON-1

Product Details:

Description:- Our Electro-Hydraulic Hot Mounting Press is a kind of fully automatic mounting machine, equipped with In-Out water cooling system and touch screen operation. It is suitable for the heat mounting (thermo hardening & thermoplastic) for all kinds of materials.

The thermo set plastic granules or Bakelite powder together with specimen being mounted is formed under heated conditions. During this process the pressure is self-adjusted by the hydraulic pressure exerted by the power pack inside the machine. The mounting press is equipped with a Digital PID temperature-timer controller to establish real-time temperature meanwhile.

 

For each specimen-mounting, 8-10 minutes is enough for the mould to be prepared and can be handed over for polishing. Also, it is available to prepare two pieces of specimens at the same time, the capacity is doubled.

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Wooden Box

Product Details:

Description:- Automatic metallographic specimen mounting press is a kind of pneumatic and full automatic mounting press, equipped with in-out water cooling system. It is suitable for the hot mounting process of thermohardening & thermoplastic materials.This machine can automatically heat, apply pressure and aftersample preparation is finished, it can stop working, release pressure and then push out sample automatically. It is the ideal sample preparing equipment to be used in factories, researching institutes and college laboratories.

*For more detail please refer the product catalog.

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Wooden Packing

Product Details:

Description:- Model BXQ-2AS automatic metallographic specimen mounting press is a kind of full automatic mounting press, equipped with double working positions and in-out water cooling system. It is suitable for the hot mounting (thermo-hardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. It is the ideal specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Wooden Box

Product Details:

Metallographic Hot Mounting Press (MODEL: BQ2B-Series)

Brief Description:
Our BQ2B Metallographic specimen hot mounting press is a mechanical type machine. By turning the hand-wheel of the machine, a coupling of bevel gear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve.

The thermoset plastic granules or bakelite powder together with specimen being mounted is formed under heated conditions. During this process the pressure is self-adjusted by a spring fixed inside the machine. A signal light is used to indicate the heater operation. The mounting press is equipped with a Digital PID temperature-timer controller to establish real-time temperature meanwhile.

For each specimen-mounting, 8-10 minutes is enough for the mould to be prepared and can be handed over for polishing.

 

 

Additional Information:

• Item Code: BQ2B-30
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Delhi
• Delivery Time: 2-4 Weeks
• Packaging Details: Transport worthy Wooden Box

Product Details:

DESCRIPTION:-

BETAMON-7 Automatic Metallographic Specimen Mounting Press is a kind of advanced full automatic mounting press, the whole process of  mounting can be controlled by program, and realized one-key operation for process of mounting, includes heating, pressuring, dwell of pressuring, cooling, release of pressuring, etc. It suits to mount the specimen of metal and rock.

FEATURES:-Pneumatic pressuring to solidify mounting materials (Urea-formaldehyde molding powder or Bakelite powder) through the mounting program.Built-in water cooling system, mount molding and cool fleetly.

Additional Information:

• Delivery Time: 1-2 WEEK

Product Details:

_{Description:- BECMON-1Q-30 is a kind of pneumatic type automatic mounting press, which is suitable for inlaying micro, hard to handle or irregular metallographic and lithofacies specimens, so as to facilitate cutting, grinding and polishing of specimens, and then observe material structure under metallographic microscope, spectral or measure the hardness of the material by hardness tester. In the process of sample preparation, the machine automatically heats up, pressurizes, cools down to the final automatic pressure relief stop through a series of actions, which realizes the effect of unattended sample preparation, and features the advantages of more humanized, simple operation and high efficiency. It is the ideal sample preparing equipment to be used in factories, researching institutes and college laboratories.}

*For more detail please refer the product catalog.

Additional Information:

• Delivery Time: 1-2 Weeks
• Packaging Details: Wooden Packing

Product Details:

Our Automatic Specimen Hot Mounting Press is a kind of fully automatic mounting machine, equipped with In-Out water cooling system. It is suitable for the heat mounting (thermo hardening & thermoplastic) for all kinds of materials.
The thermo set plastic granules or Bakelite powder together with specimen being mounted is formed under heated conditions. During this process the pressure is self-adjusted by the hydraulic pressure exerted by the power pack inside the machine. The mounting press is equipped with a Digital PID temperature-timer controller to establish real-time temperature meanwhile.
For each specimen-mounting, 8-10 minutes is enough for the mould to be prepared and can be handed over for polishing. Also, it is available to prepare two pieces of specimens at the same time, the capacity is doubled.

 

Technical Specifications:

 

 

Additional Information:

• Item Code: ABQ2B-50
• Delivery Time: 2 weeks

Product Details:

Automatic Specimen Hot Mounting Press BXQ Series press is used to inlay small specimens in irregular shapes, or specimens which are not easy to take up. The inlaying operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material.

· The thermo set plastic granules or Bakelite powder together with specimen being mounted is formed under heated conditions. The machine is equipped with built-in water cooling system and it is heated and intensified with pressure automatically.  The mounting press is equipped with a Digital PID temperature-timer controller to establish real-time temperature meanwhile.
·  For each specimen-mounting, 8-10 minutes is enough for the mould to be prepared and can be handed over for polishing. The machine is for hot solid materials with the temperature automatically regulated and controlled.
·  After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient for further processing.
·  Machine is easy to operate and has no obvious vibration source.

Additional Information:

• Delivery Time: 2 weeks

Product Details:

DESCRIPTION:-

Our ABQ2B Automatic Mounting Press Machine metallographic specimen. It is suitable for all Thermosetting Materials, because of the cooling system. It can automatically finish with the heating temperature, the holding time and acting force.The operator can change 3 specification patterns according to the difficult specimens

Additional Information:

• Delivery Time: 1-2 WEEK